Canon MG 3222 Wireless Setup [Easy Steps]

 

Canon MG3222 Wireless Setup

Canon MG 3222 is a wireless all-in-one printer, which can enhance the printing experience. You can easily set up this printer to be able to print wirelessly over a network. 

You can get 8.5’x11’ sized borderless photo prints using this printer. It offers the users color print resolution at 4800×1200 dpi. Besides, using the auto duplex printing, you can easily print on both sides of the paper.

So, if you want to avail of these amazing features, you need to set it up properly. Here, we will guide you with easy to follow steps and procedures to do canon mg3222 wireless setup.

Canon Pixma MG3222 Wireless Setup: Steps to Follow

In this section, we will discuss how to set up wireless printer canon Pixma mg3222. Following the easy steps detailed here, you will be able to set up the printer easily. 

Step 1: Press the Menu Button

To start the setup process, you need to first tap on the “Menu Button”. Then press this button again to go to the “Settings”. Tap on the “OK” button next.

Step 2: Select Device Settings

After pressing the “Menu” button, the next thing that you need to do is choose the ‘Device settings’ option. Next, tap on the “OK” button to confirm it.

Step 3: Go to the LAN settings

Now, you have to go to the “LAN” settings. Tap on the “OK” button next to confirm the action.

Step 4: Choose the “Change Wireless /wired” option

Tap on the “Change wireless/wired” option next. Tap on the “OK” button next. 

Step 5: Choose the Wireless LAN Active Option

Next, tap on the ‘Wireless LAN active” option., Tap on the “OK” button again and proceed to the next step.

Step 6: Choose the “Wireless LAN settings” 

Now, you need to choose the “Wireless LAN settings” option. Press the “OK” button next.

Step 7: Go to the WPS Configuration 

Now, choose the WPS configuration button on the printer. Tap on the “OK” button next.

Step 8: Tap on the Push Button Method

Now, you need to tap on the “Push” button method. Then tap on the “OK” button to confirm the action.

Now, go to the next step.

Step 9: Press the WPS button

When the access point is ready, you need to tap on the “Ok” button. And then, press the “WPS” button on the access point within minutes.

Step 9: Check the Completion message

After pressing the WPS button wait for a while, now check if the Completion message is popping up on the screen. Tap on the “OK” button next. 

Note: If you fail to do the above steps correctly, you will be shown a “Timeout” message.

Now you are done with canon pixma mg3222 wireless setup. You can now check if it’s working correctly by trying to print something using this printer.

Additional Information

Here, we are mentioning some of the names and versions of Operating systems with which you can set up this printer. 

  • Windows 10, 7 and 8
  • Windows 7 SP1, Windows Vista SP1, Windows Vista SP2
  • Mac OS X v10.5.8 – 10.9.x, and Mac OS 10.12(Sierra) or later
  • Linux